Price Revit Library

Click Here to download Price's complete REVIT Model Library.
   Terminals 
+Top
Click Here to download Price's complete REVIT Terminals Library.
SDV - Single Duct
Price has, as a primary component of its terminal unit line, the SPV (pneumatic controls), SDV (digital controls) SEV (electronic controls) single duct VAV assemblies. These units are designed to control the airflow rate of conditioned air into an occupied space in response to a control signal, usually a thermostat.
Download Revit
SDVLP - Single Duct
The Price SPVLP, SDVLP, SEVLP single duct terminals fit in restricted ceiling spaces. Casing height is 10”. Units are meant to control the airflow rate of conditioned air into an occupied space in response to a control signal, usually a thermostat.
Download Revit
SDVQ - Single Duct
The Price SPVQ, SEVQ, and SDVQ Digital controls single duct VAV assembles integrate both VAV and Silencer Technology into one complete package. These units are designed to control airflow rate of conditioned air into an occupied space while achieving the lowest noise levels in the industry. The Q series terminal is ideal for noise-sensetive applications such as classrooms, libraries, performance halls and studios.
Download Revit
FDC - Constant Volume Fan Powered Terminal
PRICE constant volume fan powered terminals feature compact, durable zinc-coated steel casings with a large removable service panel to provide access to the interior of the unit. A speed controller is standard for adjusting fan section airflow.
Download Revit
FDCG - Price Genesis® Series Fan Powered Terminals
Price Genesis® Series Fan Powered Terminals are quiet, durable, energy efficient, and accessible for field servicing. Price Genesis® Terminals are specifically designed to attenuate radiated noise which is a major concern with fan powered terminals, particularly at high capacities. An acoustical return air inlet section and thick acoustic insulation reduces radiated noise levels in the room by as much as 10 NC below conventional fan powered terminals.
Download Revit
FDCGQ - Price Genesis® "Q" Series Fan Powered Terminals
Price Genesis® "Q" series Fan Powered Terminals are designed to take advantage of silencer acoustical properties producing an extremely quiet unit while maintaining all the Price Genesis® standard features.
Download Revit
FDCLP
Price constant volume fan powered terminal low profile units are designed to fit in restricted ceiling space. The units height varies from 10-1/2" to 12-1/2". Features such as advanced sensor technology, low noise levels, variety of product sizes and flow ranges, flexible hot water coil selection and new innovative options establish PRICE as an industry leader for terminal units.
Download Revit
FPCQ2, FECQ2, FDCQ2
Price offers the Q2 series for noise sensetive applications. Typical installations include open office spaces, educational facilities, libraries courtrooms and meeting rooms.
Download Revit
FDV - Variable Volume Fan Powered Terminal
Fan powered variable volume terminal units are designed for use in single duct VAV systems that require both cooling and periodic heating of exterior zones of a building. The basic fan powered terminal unit consists of a variable volume primary air section plus a fan section to recirculate warm ceiling plenum air. The design incorporates both the cooling and heating function into a single terminal unit casing.
Download Revit
FDVLP - Low Profile Variable Volume Fan Powered Terminal Unit
The Price low profile variable volume fan powered terminal units are designed to fit in constricted ceiling space. The unit heights vary from 10.5" to 12.5"
Download Revit
FCHC - Horizontal Concealed Fan Coils
Factory assembled, horizontal blow-through ducted fan coils designed for concealed installations above ceilings with ducted air discharge.
Download Revit
FCHHP
Factory assembled, horizontal blow-through fan coils designed for concealed installations above ceilings with medium length discharge duct. Suitable for projects such as hotels, motels, condominiums, hospitals and general commercial applications.
Download Revit
FDBU - Underfloor Fan Powered Booster Unit
Price has, as a primary component of its underfloor terminal unit line, the FDBU (digital controls) assemblies. These units are designed to provide cool or heated air into an occupied space in response to a control signal. The clean and efficient design of these fan terminal units results in a system component that has low noise generation for quiet operation. A compact configuration makes this unit easy to install in today’s raised floor systems.
Download Revit
Design 75 - SL, SH, DL, DH
The PRICE Design 75 line of mechanical type terminal units are available with either constant volume or variable volume regulators for use in systems with up to 6" static pressure. Optional water and electric reheat coils are available. They feature rugged construction for years of maintenance free operation.
Download Revit
DPV, DPS, DPQ, DPM
The Price dual duct terminal unit is a factory built assembly, utilizing the latest developments in volume control. It precisely regulates the flow of conditioned air to a room or zone in response to thermostat demand for cooling or heating.
Download Revit
FFU, FFUSS, FFUD - Fan Filter Unit
Price FFU/FFUSS Series Fan Filter Units are room side replaceable, lightweight, corrosion resistant, low profile ceiling module that consist of a fan/motor assembly and high efficiency HEPA/ULPA filter enclosed in an aluminum (FFU) or stainless steel (FFUSS) construction plenum
Download Revit
LGB
Price series LGB provide complete zoning flexibility from a single zone source. LGB terminals complement packaged rooftop and low pressure central station units by providing excellent temperaturecontrol and central station units by providing excellent temperature control and central air distribution with unlimited zoning.
Download Revit
LPV, RPV
Price manufactures round duct control valves specifically designed for environments where corrosion and contamination of VAV terminal equipment is a concern. Typical applications include fume hood and laboratory exhaust or industrial systems.
Download Revit
   Specialty
+Top
Click Here to download Price's complete REVIT Specialty Library.
RPL - Linear Radient Panels
The Price RPL series linear radiant panels are designed to provide radiant heating and cooling to a zone. The RPL features extruded sections designed to optimize radiation and which assemble to create a panel with integrated heat sinks to effectively transfer heat from copper tubes to the panel face. Designed to integrate into a standard suspended ceiling system or alongside a ceiling section, the RPL then radiates or absorbs heat from the zone below. The superior thermal comfort performance and high capacity of the RPL make it suitable for use in almost any application.
Download Revit
RPM - Modular Radiant Panel
The Price RPM series modular radiant panels are designed to provide radiant heating and cooling to a zone. The RPM features heat sinks on the back of a rigid ceiling tile to effectively transfer heat from copper tubes to the panel face. Designed to integrate into a standard suspended ceiling system, the RPM then radiates or absorbs heat from the zone below. The superior thermal comfort performance of the RPM make it suitable for use in almost any application.
Download Revit
ACB1 - Active Chilled Beam One-Way Discharge
The ACB1 is a high capacity active chilled beam. This unit can accommodate high cooling capacities while simultaneously supplying fresh air to the occupied area improving indoor air quality and humidity control. Best suited for placement along the façade or wall, the ACB1 can deliver air parallel to a window reducing outdoor effects into a room.
Download Revit
ACB2 - Active Chilled Beam, Two-Way Discharge
The ACB2 is a high capacity active chilled beam. This unit can accommodate high cooling capacities while simultaneously supplying fresh air to the occupied area improving indoor air quality and providing humidity control. The active chill beam can be used for heating or cooling applications. The ACB2 induces room air into the beam and mixes with supply air to deliver to the occupied zone. With the supply air discharged on two sides, the ACB2 lends itself to many different installation configurations. The chilled beam can be easily integrated into suspended ceilings made from metal, gypsum plasterboard, mineral fibres etc.
Download Revit
LFG - Linear Floor Grille
The PRICE LFG is a premium quality linear floor grille designed for raised floor applications and is ideal for perimeter ventilation. Extruded aluminum bars provide crisp styling and exceptional strength. The LFG incorporates a compact steel plenum to facilitate supply connections and debris collection.
Download Revit
LFGH - Linear Floor Grille with Integrated Heat
The PRICE LFG-H is a premium quality linear floor grille with integrated heat designed for raised floor applications and is ideal for perimeter ventilation. Extruded aluminum bars provide crisp styling and exceptional strength. The LFG incorporates a heater for perimeter heating in a compact steel plenum to enclose all components.
Download Revit
CSA - Architectural Chilled Sail
The CSA is a high capacity element with an attractive face for exposed installation in a T-Bar or architectural ceiling system. This versatile product can be used in various applications such as an installation below ceiling height as an architectural feature, as a chilled area built into suspended ceiling systems, or as a linear grid ceiling. Used in both heating and cooling operations, the CSA can be placed around utilities such as lighting, sprinklers, air outlets, etc. incorporating itself into any building design.
Download Revit
CSC - Concealed Chilled Sail
The CSC is a high capacity element designed for concealed mounting applications. The CSC is ideal for installation above open, suspended ceilings or architectural ceilings with a minimum of 40% open area. It is suitable for cooling all room types. Additionally, the CSC can be used for heating making it an ideal solution for heating and cooling applications.
Download Revit
PCB - Passive Chilled Beam
The PCB is a high capacity passive chilled beam. This unit operates without an air supply, solely through free convection to cool the occupied zone. The PCB can accommodate various installation options such as above perforated ceilings or mounted in suspended ceilings.
Download Revit
DBV - Round Floor Variable Volume Basket
The Price DBV is a variable volume basket that can be used with any of the Price 8" floor diffusers. The DBV allows for even distribution of supply air through the round floor diffuser core while integrating into a VAV cooling system. The black plastic basket prevents see-through to the building floor, and is also used to catch debris that falls through the diffuser face. The integral control damper modulates from full open to fully closed automatically, driven from a 24VAC actuator mounted underneath the basket. Modular RJ12 jacks mounted to the underside of the basket allow unit to easily tie into the Price Underfloor System with modular wiring. The unit is installed from the room side, slipping into the diffuser frame for easy installation.
Download Revit
RFB - Round Floor Boot
The PRICE RFB is a high performance floor boot designed for raised floor applications. Used with the Round Floor Diffuser line, the RFB incorporates a steel plenum to facilitate supply connections, debris collection and for advanced applications. PRICE RFB can be ordered in a variety of models to provide: Constant volume heating, Constant volume heating with VAV cooling and VAV cooling only.
Download Revit
FRFD - Flush Face Radial Flow Diffusers
PRICE FRFD series diffusers are designed to produce a low velocity, multi-directional air pattern. Fixed pattern control blades set at precise discharge angles provide effective directional air control with minimum resistance or noise generation.
Download Revit
RFDD, RFID, RFTD - Round Floor Diffusers
The PRICE RFDD floor displacement diffuser is a new addition to the Price line of floor outlets and is ideal for use where low induction, floor level flow is required. The diffuser slots discharge air in a displacement manner, horizontally across the floor where it is drawn to heat loads and transports heat and contaminants up to the return grilles in the ceiling.
Download Revit
DGU - Underfloor Deflection Grille
The Price Underfloor Defection Grille serves as a supply diffuser for underfloor air channels. The DGU will evenly disperse air from high velocity ductwork into the floor plenum. This ensures an even pressure and temperature distribution in the underfloor plenum. The DGU features a patented indexing device and can be adjusted to obtain the desired spread of supply air to an underfloor plenum resulting in more uniform air supply from floor diffusers drawing from a common plenum.
Download Revit
PDAS, PDAR - Perforated Laboratory Diffuser
Price PDAS/PDAR Series perforated laboratory diffusers are constructed of aluminum with stainless steel dampers. For use in most laboratory applications, its unique design has many features to give it performance flexibility, ease of cleaning and an airtight backpan for ceiling integrity. Ideal for pharmaceutical labs, cleanrooms and medical facilities.
Download Revit
PHC - Perforated High Capacity
Designed to provide an even two-way horizontal flow along the length of your workspace, this prism-shaped perforated diffuser is ideal for cleanroom and lab applications where a high capacity flow is demanded.
Download Revit
   Displacement
+Top
Click Here to download Price's complete REVIT Displacement Library.
DF1 Series Displacement
The PRICE DF1 Series displacement diffusers are designed to produce a one-way low velocity air supply perpendicular to the diffuser face. The DF1 discharges air evenly across its perforated face with minimal turbulence or induction of room air. The cool supply air flows down to the floor level and gradually fills the occupied space.
Download Revit
DF1C Series Displacement
The PRICE DF1C Series displacement diffusers are designed to produce a low velocity air supply perpendicular to the diffuser face. The DF1C discharges air evenly across its perforated face with minimal turbulence or induction of room air. The cool supply air flows down to the floor level and gradually fills the occupied space. Typically installed at the junction of two walls or in a 90º recess, this appealing diffuser meshes seamlessly into any décor. The superior air quality and low noise levels realized with the DF1C make it suitable for office space, restaurants, supermarkets, theatres, hotels, convention centers, schools or any application where air quality and occupant comfort demands are high.
Download Revit
DF1W Series Displacement
PRICE DF1W Series displacement diffusers are designed to produce a one-way low velocity air supply perpendicular to the diffuser face. The DF1W discharges air evenly across its perforated face with minimal turbulence or induction of room air. The cool supply air flows down to the floor level and gradually fills the occupied space. The DF1W is designed to be integrated into the wall space, increasing space in the occupied zone while maintaining the high level of performance seen in the DF1.
Download Revit
DF1L Series Displacement
The DF1L provides the architectural look of the DF1W, with the ability to install into a ceiling grid. This is ducted from behind much like a traditional overhead diffuser and provides the benefits of displacement ventilation.
Download Revit
DF1R Series Displacement
PRICE DF1R Series displacement diffusers are designed to produce a one-way low velocity air supply perpendicular to the diffuser face. The DF1R discharges air evenly across its perforated face with minimal turbulence or induction of room air. The cool supply air flows across the floor, gradually filling the occupied space. Typically installed in a floor step or at floor level, the DF1R is ideal for applications calling for discreet or seamless air delivery. This appealing diffuser meshes seamlessly into any décor, hidden in unobtrusive room locations. The superior air quality and low noise levels realized with the DF1R make it suitable for theaters, classrooms, or any application where air quality demands are high.
Download Revit
DF3 Series Displacement
PRICE DF3 is a multiple way rectangular displacement diffuser providing airflow in three (3) directions around the diffuser. The DF3 provides the same performance as the DF1 but for applications that demand higher capacity.
Download Revit
DR90 Series Displacement
Price DR90 series displacement diffusers are designed to produce a low turbulence horizontal air supply in a 90° pattern. Typically installed at the joining of two walls or in a 90° recess, the DR90 discharges air evenly across its perforated face. The cool air then drops to the floor and gently floats into the occupied zone in a layer 2-5" thick. This appealing diffuser meshes seamlessly into any décor providing a curved detail to the space. The superior air quality and low noise levels realized with the DR90 make it suitable for office space, hotels, convention centers, schools or any application where air quality demands are high.
Download Revit
DR180 Series Displacement
Price DR180 series displacement diffusers are designed to produce a low turbulence horizontal air supply in an 180° pattern. Typically installed against a wall or pillar, the DR180 discharges air evenly across its perforated face. The cool air then drops to the floor and gently floats into the occupied zone in a layer 2-5" thick. This appealing diffuser meshes seamlessly into any décor providing a curved detail to the space. The superior air quality and low noise levels realized with the DR180 make it suitable for office space, hotels, convention centers, schools or any application where air quality demands are high.
Download Revit
DR180U Series Displacement
Price DR180U Series displacement diffusers produce a low turbulence horizontal air supply in an 180º pattern. Due to its shape, the DR180U can accommodate large inlets and can handle higher flows than a standard DR180U. Its shape also contributes to its unique discharge air pattern with farther spread than throw into a room. Typically, this unit is installed against a wall or pillar. With a seamless curved front, the DR180U makes an appealing addition to any décor providing a curved detail to the space.
Download Revit
DR360 Series Displacement
Price DR360 series displacement diffusers are designed to produce a low turbulence horizontal air supply in a 360o pattern. Typically installed free standing away from the wall, the DR360 discharges air evenly across its perforated face. The cool air then drops to the floor and gently floats outward in a layer 2-5" thick. This appealing diffuser meshes seamlessly into any décor and can be installed where units are conventionally not possible, due to architectural reasons or room size. The superior air quality and low noise levels realized with the DR360 make it suitable for office space, hotels, convention centers, schools or any application where air quality demands are high.
Download Revit
   GRD
+Top
Click Here to download Price's complete REVIT GRD Library.
Louvered Face Supply / Return Grilles
PRICE single and double deflection louvered face supply grilles and returns can be economically supplied in steel, aluminum or stainless steel for almost any application. Perforated face and grid core styles provide an architectural and performance option. Optional opposed blade dampers are available in either steel or aluminum construction.
Download Revit
Radial Flow Diffusers
The RFD is designed to supply large air volumes in confined spaces with minimal velocity. This diffuser produces a semi-cylindrical air pattern ideal for laboratory settings with fume hoods. RFD is available in aluminum or stainless steel construction.
Download Revit
Square Ceiling Diffusers
PRICE offers a complete range of square cone ceiling diffusers in steel or aluminum construction. Available with fixed or adjustable air patterns, square cone diffusers are the most popular and efficient ceiling diffusers for true 360° degree radial diffusion. Standard ceiling modules, numerous mounting borders, and a wide range of inlet sizes are available.
Download Revit
Radial Vane Diffusers
The RVD utilizes unique radial slots to provide a “vortex” airflow which quickly mixes supply air with room air providing a highly uniform temperature in the conditioned space.
Download Revit
Laminar Flow Diffusers
PRICE LFD series laminar flow diffusers have been engineered to provide a uniform vertical projection of supply air at controlled low velocities. The downward projection or "piston" motion of supply air is ideal for clean room or operating room applications. Units are available in aluminum or stainless steel construction.
Download Revit
Linear Bar Grilles
PRICE offers a complete selection of extruded aluminum linear bar grilles for clean, crisp styling and efficient air distribution. They are designed for installation in sidewall, sill or floor and can be used for supply or return air. PRICE linear bar grilles combine architectural beauty with performance and versatility. A variety of construction levels, core styles, borders, and finishes are available.
Download Revit
AMDL, AMXL - Aluminum Linear Louvered Face Directional Diffusers
PRICE AMDL/AMXL Aluminum Linear Louvered Face Directional Diffusers are ideal for high capacity supply and return applications in hard ceilings or T-bar. They feature extruded aluminum construction, removable core and extremely durable powder coat finish. The AMDL/AMXL diffuser line is an excellent choice for VAV systems. These diffusers were designed to deliver a tight horizontal discharge pattern over a wide range of airflow rates. Price model AMXL comes with factory installed mixing vanes in the supply section of the diffuser to promote induction. With use of optional SRP2 plenum one diffuser can be turned into a supply/return unit.
Download Revit
SDS/SDR
PRICE SDS / SDR Series supply and return linear slot diffusers offer high performance in a VAV outlet with 180° air pattern control and complete blank-off for true design flexibility. The crisp, clean lines of this linear slot diffuser are architecturally appealing, with its extruded aluminum frames, blend in virtually any ceiling system.
Download Revit
TBD4 Series - T-Bar Diffusers
PRICE TBD4 diffusers provide a tight horizontal air pattern that is ideal for VAV systems. The blade type pattern controllers are fitted with a tight sealing extruded vinyl blade edge for positive control. They are field adjustable for air patterns toward or away from the diffuser inlet side. The TBD4 is available in 1 to 4 slots.
Download Revit

PRICE ONLINE CATALOG

Price - Green With Innovation
Representatives | About Price | Careers | Contact Us | Privacy Policy
Copyright ©2012, All Rights Reserved - Price Industries
2975 Shawnee Ridge Court - Suwanee, Georgia 30024 - (770) 623-8050