DDiA Series

Product Information

Displacement w/Adjustable face
DDiA Series

The PRICE DDiA Series swivel displacement outlet, manufactured by Krantz®, is intended for use in production and work areas where it is not always possible to locate the diffusers near the occupied zone. These units are ideal for the removal of air pollutants from a large work zone. With nested twist nozzles in the diffuser face, the DDiA can penetrate deeper into the occupied zone from a perimeter location. In addition the face of the diffuser can be rotated to accomodate longer throws in cooling mode, and introduction of air at low levels in heating mode.

  • Built in rotatable air distribution face to allow for heating and cooling flows
  • Element can be swivelled from +10º to -35º from horizontal
  • Direction of air flow can be altered by hand or servomotor
  • Perforated sheet metal generates low turbulence air floww.

Finishes/ Construction:
  • Outlet and housing made of galvanized sheet metal
  • Special finishes available
Available Sizes
  • Length;
48" (1200 mm)
62" (1600 mm)
78" (2000 mm)
95" (2400 mm)

Product Selection Checklist

  1. Select Unit Size based on control and acoustic parameters.
  2. Select Control type (Pneumatic, Electronic, Digital) based on system design.
  3. Select Accessories as required.
  4. Select Heating Coil, if required.
  5. Select Control Sequence based on system design.
The pdfs are best viewed with Adobe Reader. Download it now.
Adobe Reader


RepresentativesAbout PriceCareersContact UsPrivacy PolicyLimited Warranty
Copyright ©2014, All Rights Reserved - Price Industries
2975 Shawnee Ridge Court - Suwanee, Georgia 30024 - (770) 623-8050