Section JDisplacement Ventilation

ROUND RADIAL PAINT BOOTH

DRPBi Series
DRPBi Series

The DRPBi-HC, manufactured by Krantz Komponenten®, is designed to generate constant displacement airflow for applications with high discharge heights and pollutant concentration, such as an aircraft paint booth. The DRPBi-HC is able to project large volumes of air deep down into the room. In cooling mode, air is supplied from the perforated face creating an umbrella shaped pattern into the room. In heating mode the center nozzle is activated, entraining primary air from the perforated section, projecting down into the occupied zone.

ROUND RADIAL NOZZLE WITH HEATING AND COOLING

DRNiHC Series
DRNi-HC Series

The DRNi-HC, manufactured by Krantz Komponenten®, is intended for use in applications where it is not feasible to install the displacement outlet in the occupied zone. The DRNi-HC is equipped with a nozzle which allows the air pattern to be adjusted when switching from heating to cooling mode. In cooling mode the air is supplied from the perforated face only while, in heating mode, the center nozzle becomes active, entraining primary air from the perforated area and forcing it downward into the occupied zone.

DRUM DIFFUSER INDUSTRIAL ADJUSTABLE

DDiA Series
DDiA Series

The DDI-HC, manufactured by Krantz Komponenten®, is intended for use in production and work areas where it is not always possible to locate the diffusers near the occupied zone. Twist nozzles nested in the diffuser face allow the DDi-HC to throw supply air further than a typical unit, penetrating deeper into the occupied zone. In addition, the face of the diffuser can be rotated to accommodate longer throws in cooling mode, while pushing supply air down into the occupied zone in heating mode.

CIRCULAR DIFFUSER WITH HEATING AND COOLING

DR360i-HC Series
DR360i-HC Series

The DR360i-HC, manufactured by Krantz Komponenten®, industrial displacement diffuser can be mounted on the floor or suspended over the occupied zone and features an adjustable discharge pattern to accommodate heating and cooling modes. This diffuser is designed to provide a draft-free umbrella shaped pattern in cooling mode or direct warm supply air vertically downward into the occupied space in heating mode.

Additional Displacement Ventilation Diffusers

The pdfs are best viewed with Adobe Reader. Download it now.
Adobe Reader

PRICE ONLINE CATALOG

 
RepresentativesAbout PriceCareersContact UsPrivacy PolicyLimited Warranty
Copyright ©2014, All Rights Reserved - Price Industries
2975 Shawnee Ridge Court - Suwanee, Georgia 30024 - (770) 623-8050