UMCB Series

Product Information


Underfloor Modulating Controller Box Control
with BACnet
The Price UMCB is used to control the FDBU (Fan Powered Booster Unit), and up to 12 remote terminal dampers. By supplying the UMCB complete with a Price thermostat, the UMCB will control the Fan operation (On/Off for standard motors, Speed Modulation for ECM motors) as well as electric heat based on the thermostat's signal. A Building Automation System (BAS) can also be used instead of a thermostat as an input for the UMCB through plug and play connections as this controller has BACnet capabilities.

  • BACnet network capabilities that allow the UMC3 to be networked to a BAS.
  • 5 RJ12 Output jacks used to convey power and control signal to 30 DBV or RFB remote terminals
  • 2 RJ45 Output jacks used to convey power and control signal to 12 LFGH remote terminals
  • Plug and play connections for easy installation
  • 96 VA Class 2 Transformer
  • Damper status lights (Yellow LEDs)
  • Line Overload Indicator LEDs for each output jack
  • 5 new Thermostat options (Room Sensor, Dial, LCD, LCD with Motion Sensor, and Wireless).
Product Selection Checklist

  1. Select input signal.
  2. Select sensors based on sequence.
Example: UMCB / PCT-TS-LCD
The pdfs are best viewed with Adobe Reader. Download it now.
Adobe Reader


RepresentativesAbout PriceCareersContact UsPrivacy PolicyLimited Warranty
Copyright ©2014, All Rights Reserved - Price Industries
2975 Shawnee Ridge Court - Suwanee, Georgia 30024 - (770) 623-8050