Product Information

View Performance Data FPCG/FDCG

Price Genesis® Series Fan Powered Terminals are quiet, durable, energy efficient, and accessible for field servicing.
Price Genesis® Terminals are specifically designed to attenuate radiated noise which is a major concern with fan powered terminals, particularly at high capacities. An acoustical return air inlet section and thick acoustic insulation reduces radiated noise levels in the room by as much as 10 NC below conventional fan powered terminals.
Price Genesis® Terminal Units are supplied with the latest motor technology: the ECM — Electronically Commutated Motor. The ECM motor is a brushless DC motor design with a built-in inverter and a microprocessor based motor controller. The ECM motor has several features which make it superior to conventional electric motors:

  • Factory set fan flow
  • Energy efficient operation
  • Long life
  • Low operating temperature
  • Programmable
  • Wide operating range

Each ECM motor supplied with the Genesis Terminal is factory preset with the Price ENERSAVE™ operating program. The ENERSAVE™ program has been developed to provide consistent, repeatable fan volume and optional energy efficiency.
For more specific information on ECM motors technology and benefits see page F436-F439.
Optional PSC motors are also available.

Price Genesis® Terminals feature four insulated and gasketed access panels to the blower area. The panels are small and easy to handle but large enough to remove complete blower/motor assembly if required from any direction. The feature is strongly recommended for applications in confined ceiling spaces. Each panel is equipped with quick-access, hand-operated snap latches for easy, fast, and tool-free field servicing.
Price Genesis® Terminals are heavy duty construction designed to last. Casing material is 20 gauge zinc-coated steel. Motor/blower assembly is mounted on a uniquely designed 16 ga support bracket which reduces noise and improves structural integrity of the complete assembly.
Price Genesis® Terminals are available in two standard models: FPCG (pneumatic control) and FDCG (digital control). The primary air section is pressure independent and 5 in. -16 in. primary air inlet sizes are available to match primary air flow requirements.
Catalog performance data is the result of Price laboratory testing done in accordance with AHRI 880 certification program.
Each Price fan powered terminal unit receives a full operational check before shipment and arrives factory calibrated in accordance with project specifications. This means costly labor and setup delays are avoided.
Units are ETL certified to meet UL1995 and CSA No. 236.

A Participating Corporation in the AHRI 880 Certification Program.

    Product Selection Checklist

  1. Select Unit Inlet Size based on control and acoustic parameters.
  2. Select Control type
    (Pneumatic, Electronic, Digital) based on system design.
  3. Select Accessories
    (Inlet or Outlet, Attenuator) as required.
  4. Select Reheat Coil, if required.
  5. Select Control Sequence based on system design.

PSC Motor Data
Unit Motor Full Load Amps
Size H.P. 115V 208V 240V 277V

20 1/8 2.5 1.0 1.0 0.8
30 1/4 4.8 1.9 1.8 1.8
40 1/2 8.2 3.4 3.4 2.8
50 3/4 11.5 5.4 4.6 4.3
60 2x1/2 15.9 6.8 6.6 6.7
70 2x3/4 19.2 8.2 8.2 7.7

ECM Motor Data
Unit Motor Full Load Amps
Size H.P. 115V 240V 277V

10 1/3 1.4 0.6 0.5
20 1/2 3.6 1.7 1.5
30 1/2 6.5 3.0 2.5
40 1/2 6.6 3.0 2.5
50 3/4 9.7 4.3 4.1
60 2x1/2 12.5 5.6 5.1
70 2x3/4 19.0 8.6 8.6
  • Recirculating fan section operates continuously.
  • Primary air section controls are pressure independent.
  • 20 gauge construction zinc-coated steel housing, mechanically sealed, leak-resistant construction.
  • 1" [25] thick, min. 1.5 lb density fiberglass internal insulation which meets requirements of UL 181 and NFPA 90A.
    Several other Price liner options available (FF- fiber free foam, FB- foil faced
    rigid fiberglass board, SM solid metal liner
    (dual wall), PM perforated metal liner,
    AFPM- foils face fiberglass with perforated
    liner). See page F271-F272 for detailed information about Price liners selection
  • Four insulated and gasketed blower access
    panels. Each equipped with quick-access hand operated snap latches for easy, fast, and tool-free field servicing.
  • ECM – electronically commutated motor 60 Hz, single phase, 115, 240, 277 VAC.
  • Optional PSC motors available 60Hz, single phase, 115, 208, 240, 277 VAC.
  • Motor is mounted on vibration isolators.
  • Blower/motor assembly is removable as one unit.
  • Solid state speed controller, SCR for adjusting fan section air flow.
  • Certified in accordance with the AHRI 880 certification program.
  • Units are ETL listed to meet UL1995 and CSA No. 236
  • A 2 in. collar is provided for inlet duct connection.
Features & Benefits
Quiet, reversible, accessible, energy efficient, AHRI and ETL certified, loaded with options.
1. Reversible casing. Flips up side down for LH or RH configurations.   8. Primary air equalization screen.
2. Heavy duty 20ga casing.   9. Gasketed access panels for quiet operation and air tight construction.
3. Unique 16 ga rigid blower isolation support.   10. Thick fiberglass insulation w/variety of Price liner options. see Liners.
4. Four access panels, each large enough to service motor blower assembly.   11. Tool-free snap latches.
  12. Quick connect for motor leads.
5. Integral inlet attenuator with 2 in. insulation to lower radiated noise, variety of configurations available, see Accessories.   13. Energy efficient ECM motor.
6. Price superior SP300 Sensor technology.   14. Centered discharge.
7. Single NEMA1 enclosure with fan and damper controls. One cover to access both.      
The pdfs are best viewed with Adobe Reader. Download it now.
Adobe Reader


RepresentativesAbout PriceCareersContact UsPrivacy PolicyLimited Warranty
Copyright ©2014, All Rights Reserved - Price Industries
2975 Shawnee Ridge Court - Suwanee, Georgia 30024 - (770) 623-8050