| |
|
| Features: |
|
|
- Recirculating fan section operates
continuously.
- Primary air section controls are pressure
independent.
- Return Air Inlet attenuator provided to
reduce radiated noise. Sizes 10 and
20 are provided with deflective boots.
Larger units are designed to include 2
and 3ft long acoustical sections lined
with 2 in. thick media to reduce radiated
noise more effectively.
- 1 in. [25] thick, min. 1.5 lb density
fiberglass internal insulation which
meets requirements of UL 181 and
NFPA-90A. Several other Price liner
options available (FF-fiber free foam,
FB- foil faced rigid fiberglass board,
SM solid metal liner (dual wall), PM
perforated metal liner, AFPM- foil faced
fiberglass with perforated liner).
- Two insulated blower access panels
available on top and bottom allowing
reversability in the field
- PSC motors available 60Hz, single
phase, 115, 208, 240, 277 VAC.
- Optional ECM – electronically
commutated motor 60 Hz, single phase,
115, 240, 277 VAC.
- Motor is mounted on vibration isolators.
- Blower/motor assembly is removable as
one unit.
- Solid state speed controller, SCR for
adjusting fan section air flow.
- Certified in accordance with the AHRI
880 certification program.
- Units are ETL listed to meet UL1995 and
CSA No. 236
- A 2 in. collar is provided for inlet duct
connection.
|
|
|
 Product Selection Checklist |
|
- Select Unit Inlet Size based on control and acoustic parameters.
- Select Control type (Pneumatic, Digital) based on system design.
- Select Accessories as required.
- Select Reheat Coil, if required.
- Select Control Sequence based on system design.
|
|
|