| |
|
| Design
Features |
Price constant volume fan powered terminal low profile units are designed to fit in restricted ceiling space. The units height varies from 10-1/2 in. to 12-1/2 in..
Features such as advanced sensor technology, low noise levels, variety of product sizes and flow ranges, flexible hot water coil selection and new innovative options establish Price as an industry leader for terminal units. |
| |
| Options |
- Bottom access door with quarter-turn cam latch fasteners for quick removal.
- Variety of power supply voltages.
- ECM motor option.
|
| Features |
- Recirculating fan section operates
continuously.
- Primary air section controls are pressure
independent.
- Zinc-coated steel housing, 22 gauge
mechanically sealed, leak-resistant
construction.
- 1/2 in. [13] thick, min. 1.5 lb density
fiberglass internal insulation which
meets requirements of UL 181 and
NFPA-90A. Several other Price liner
options are available (FF 50 - 1/2" fiber
free foam, FB- 5/8" foil faced rigid
fiberglass board). See page PDF for detailed information about Price
liners selection.
- Bottom access panel of fan section is
easily removable for field service.
- Motors are 60 cycle, single phase, 115,
277 VAC lubricated, permanent split
capacitor type.
- Motor assembly is mounted on vibration
isolators. Fan and motor assembly
removable as a unit.
- Solid state speed controller, SCR for
adjusting fan section air flow.
- Certified in accordance with the AHRI
880 certification program.
- Units are ETL listed to meet UL1995 and
CSA No. 236
- Dimensions of control shroud will vary
for series 5000 units depending on the
DDC controls supplier.
- A 2 in. collar is provided for inlet duct
connection.
- Optional ECM motor.
|
|
|
Model FDCLP8000 - Size
10-40 |
|
|
|
|
|
Model FDCLP5000 - Size 50 |
|
|
|
|
|
| |
Standard Motor Data
| Unit |
Motor |
Full Load Amps |
| Size |
H.P. |
115V |
208V |
240V |
277V |
|
| 20 |
1/8 |
2.7 |
1.2 |
1.2 |
1.0 |
| 30 |
1/4 |
3.9 |
2.2 |
2.2 |
1.5 |
| 40 |
1/2 |
5.7 |
2.5 |
2.4 |
2.4 |
| 50 |
2x1/4 |
9.7 |
4.4 |
4.4 |
3.6 |
|
ECM Motor Data 
| Unit |
Motor |
Full Load Amps |
| Size |
H.P. |
115V |
240V |
277V |
|
| 10 |
1/3 |
1.4 |
0.7 |
0.6 |
| 20 |
1/2 |
2.2 |
1.3 |
1.1 |
| 30 |
1/2 |
5.5 |
2.2 |
2.2 |
| 40 |
1/2 |
6.4 |
2.8 |
2.8 |
| 50 |
2x1/4 |
9.6 |
4.5 |
4.2 |
|
 |
|
|
A Participating Corporation
in the AHRI 880 Certification Program. |
|
 Product Selection Checklist |
|
- Select Unit Inlet Size
based on control and acoustic parameters.
- Select Control type (Pneumatic,
Digital) based on system design.
- Select Accessories (Inlet or Outlet, Attenuator)
as required.
- Select Reheat Coil, if
required.
- Select Control Sequence
based on system design.
|
|
|