Unitee CR

Product Information

Unitee CR
Design Objectives
Unitee CR Series was developed to provide the market with an attractive, functional ceiling system that prevents air leakage between the ceiling plenum and the occupied space below, thereby preventing the flow of contaminants into or out of the clean zone.
Hold-down clips press each ceiling panel tightly onto a special white vinyl gasket that is an integral part of the ceiling grid suspension members.
The entire ceiling, or any part of it, is easily removed and reinstalled, providing access to mechanical and electrical equipment or for cleaning the space above the ceiling.

Unitee Cleanroom Ceilings can be used for pharmaceutical labs, computer chip and electronics manufacturing, hospital laboratories, isolation rooms and hospital operating rooms - any situation demanding strict clean air control.

Fully Accessible
A major feature of Unitee CR Series is that it can be easily removed and reinstalled, providing access to the plenum space. Occasionally mechanical or electrical equipment fail, requiring large areas of the ceiling to be removed. Some applications require that the entire ceiling be removed for cleaning the plenum space above the ceiling. Unitee CR Series uses the Price two-piece Universal Assembly Clips, which allow the grid to be easily removed and reinstalled.

The standard finish for Unitee CR Series is B12 White Powder Coat.
Other finishes are available upon request.

Ceiling Panels
Painted metal panels are available to suit the application. Panels can be specially designed to accommodate sprinklers, gas columns and other penetrations.


  • Integral vinyl gasket prevents air leakage between the plenum and occupied space.
  • Steel hold-down clips secure the ceiling panels tight to gasketed grid member.
  • Unique grid connector clips facilitate rapid ceiling installation and allow ceiling members to be easily removed.

The hospital operating room shown above has Price HORD and LFD air diffusers integrated into the system. Integrated systems have the advantage of providing single source responsibility for component performance and for the proper interface of individual components.
  • Entire ceiling is easily removed and re-installed, providing easy access to mechanical and electrical equipment in the plenum. Ceiling plenum can be easily cleaned by removing part or all of the ceiling system.
  • Design flexibility - several profiles to choose from, any module size available.
  • Extruded aluminum construction for clean, crisp lines, maximum durability and rust-proof performance. Choice of painted or anodized finishes.

Product Selection Checklist

  1. Select Profile Number based on design conditions.
  2. Select Ceiling Panel Type.
  3. Select Finish B12 or other (specify).

Note: Drawings must be provided showing designer's reflected ceiling plan and air distribution and lighting layouts.

The pdfs are best viewed with Adobe Reader. Download it now.
Adobe Reader


RepresentativesAbout PriceCareersContact UsPrivacy PolicyLimited Warranty
Copyright ©2014, All Rights Reserved - Price Industries
2975 Shawnee Ridge Court - Suwanee, Georgia 30024 - (770) 623-8050