|
|
Models
| High induction single
slot horizontal pattern only. |
| 3/8" (10)
Slot Width |
|
Non-Insulated |
TBD 638 |
|
Insulated |
TBDI 638 |
|
| 3/4" (19) Slot Width |
|
Non-Insulated |
TBD 675 |
|
Insulated |
TBDI 675 |
|
| High induction single
slot horizontal supply pattern complete with integral single return
slot. |
| 3/8" (10)
Slot Width |
|
Non-Insulated |
TBR 638 |
|
Insulated |
TBRI 638 |
|
| 3/4" (19) Slot Width |
|
Non-Insulated |
TBR 675 |
|
Insulated |
TBRI 675 |
|
| High induction single
slot horizontal supply complete with center vertical discharge section. |
| 3/8" (10)
Slot Width |
|
Non-Insulated |
TBDV 638 |
|
Insulated |
TBDVI 638 |
|
| 3/4" (19) Slot Width |
|
Non-Insulated |
TBDV 675 |
|
Insulated |
TBDVI 675 |
|
| High induction single
slot horizontal supply complete with center vertical discharge section
and integral single return slot. |
| 3/8" (10)
Slot Width |
|
Non-Insulated |
TBRV 638 |
|
Insulated |
TBRVI 638 |
|
| 3/4" (19) Slot Width |
|
Non-Insulated |
TBRV 675 |
|
Insulated |
TBRVI 675 |
|
|
 Product Selection Checklist |
|
- Select Inlet Diameter based
on system design or duct requirements.
- Select Module Length based
on ceiling module.
- Select Outlet type by model
number (Slot width, insulation).
- Select Number of Slots.
- Select Integral Options (excluding ST and CN)
if desired.
- Select Finish (Center T-Bar
only).
Example: 8 /48 / TBD675 /
B12 |
|
| |
| Features |
- Available in both imperial and
hard metric module sizes.
- Available standard module lengths of 24"/600mm, 30"/750mm, 36"/900mm, 48"/1200mm and 60"/1500mm.
|
| Material |
- Shell / Plenum Face - Coated Steel
- Blade Assembly - Extruded Aluminum
|
| Finish |
| |
Plenum
Face and Blade |
B17 |
| |
For optional
and special finishes
see color
matrix. |
|
| |
| Options |
- Internal fiber free foam or coated
fiberglass insulation.
- External aluminum foil backed
fiberglass insulation.
|
|
| PRICE
TBD6 Series T-Bar diffusers are designed for high velocity discharge and high room air induction with low sound and pressure drop. Primarily intended for perimeter installation, this series is available in four basic configurations and two slot widths - 3/4" (19) and 3/8" (10).
Application - TBD6
/ TBR6 In cooling applications, typically installed at perimeter discharging inward with a high induction ceiling hugging air pattern mixing supply and room air, thereby minimizing temperature gradients.
Application - TBDV6
/ TBRV6 This diffuser produces two distinct air patterns simultaneously. When installed in a perimeter location, its high induction horizontal air pattern mixes rapidly with room air eliminating temperature gradients. An 180° adjustable air pattern is discharged verrticallly from the center of the unit to blanket the exterior wall or window with conditioned air thereby minimizing connvective drafts.
For more information, contact your local Price representative. |